The Fusion Staff Pure End Piece is the interchangeable outer tube section used with Fusion Handle Middle Pieces to build a Fusion Collapsible Pure Staff. Two matching end pieces connect to the center handle section to create a full-length collapsible staff ready for compatible dragon staff hubs and heads.
Choose your finished staff length, 7075 aluminum or carbon fiber construction, and preferred grip. This modular design makes the end pieces useful for replacing a damaged section, changing your staff material or grip, or building a custom Fusion setup from individual components.
7075 Aluminum or Carbon Fiber
Choose 7075 aluminum for a heavier, more budget-friendly staff or carbon fiber for a lighter, more responsive setup. Carbon fiber is particularly popular with intermediate and advanced spinners, while aluminum provides a durable and forgiving option at a lower price.
Both materials use tubing with a 7/8 inch (22 mm) outside diameter and 3/4 inch (19 mm) inside diameter, providing compatibility with a wide range of dragon staff components.
Choose Your Grip
End pieces are available with EPDM, F-Grip, or silicone. Each provides a different balance of traction, durability, weight, and performance around moisture. See the Variations tab for a detailed comparison of all three grip options.
Four Staff Lengths
End pieces are available for 55 inch (1400 mm), 59 inch (1500 mm), 63 inch (1600 mm), and 67 inch (1700 mm) finished staff configurations. The selected size refers to the approximate length of the complete staff when two matching end pieces are combined with the appropriate Fusion Handle Middle Piece, not the length of an individual end piece.
For dragon staff, around chin height is a good general starting point. If you’re unsure which size to choose, check out our Staff Length Guide.
Compatible with External Dragon Staff Hubs & Heads
The 7/8 inch (22 mm) outside diameter works with several dragon staff components that mount around the outside of the staff ends, including Bonobo Flow Dragon Hubs, Fusion V3 Dragon Hubs, Flowbonacci Plug Hubs, and Lumi LED Dragon Heads. The 3/4 inch (19mm) inside diameter works with the pressure-fit Fusion Ultra Dragon Hubs as well.
When using these types of components, we recommend installing 22 mm Fusion Removable End Caps inside the staff ends for additional reinforcement. They are particularly recommended for carbon fiber, which is more susceptible to cracking from concentrated external pressure. 7075 aluminum is generally safe to use without them, although the additional reinforcement doesn’t hurt.
Part of the Fusion Modular Staff System
Because the Fusion system is modular, individual sections can be replaced or changed without replacing the entire staff. You can change materials, grips, or staff length while continuing to use compatible Fusion components you already own.
This listing is for one Fusion Staff Pure End Piece only. A complete Pure Staff requires two matching end pieces and a compatible Fusion Handle Middle Piece.
