...
Bonobo Flow Name Logo
0
Bonobo Flow Name Logo
0
closeup of the ultra dragon staff hubs installed on a staff end
closeup of the ultra dragon staff hubs showing their pressure fit connectors
closeup of assembled spiral dragon claw practice dragon staff with purple claws
Closeup of assembled fire dragon staff with 4 kevlar wicks
Closeup of assembled fire dragon staff with 3 kevlar wicks
dragon staff adapter kit showing 2 ultra hubs and 6 fire spokes
dragon staff adapter kit showing 6 pink spokes and 2 ultra hubs
closeup of the ultra dragon staff hubs installed on a staff end
closeup of the ultra dragon staff hubs showing their pressure fit connectors
closeup of assembled spiral dragon claw practice dragon staff with purple claws
Closeup of assembled fire dragon staff with 4 kevlar wicks
Closeup of assembled fire dragon staff with 3 kevlar wicks
dragon staff adapter kit showing 2 ultra hubs and 6 fire spokes
dragon staff adapter kit showing 6 pink spokes and 2 ultra hubs

Threeworlds Ultra Dragon Hub

$65

  • Sold individually
  • No spokes or staff included
  • Pressure-fit into 19mm ID tubing

In stock

Fast
Shipping

Speedy
Support

Secure
Checkout

Durable
Products

The Threeworlds Fusion Ultra Dragon Staff Hubs are pressure-fit dragon staff hubs designed for the Fusion system, combining a secure connection with the ability to quickly install or remove your hubs for travel, storage, and different staff configurations. Each hub accepts either 3 or 4 spokes, allowing you to customize the feel and configuration of your dragon staff.

Unlike permanently mounted hubs, the Fusion Ultra uses an expandable pressure-fit connector that inserts directly into compatible 3/4 inch ID (19 mm ID) staff tubing. Tightening the connector compresses the internal rubber bushes, causing them to expand against the inside of the tubing and securely hold the hub in place.

Pressure-Fit Fusion Connection

Each Ultra Hub uses a short Fusion Cam Bolt with 2 Fusion Nylon Washers and 2 Fusion Rubber Bushes alternating beneath the cam bolt. A D90 O-Ring sits at the base of the connector.

As the connector is tightened, the rubber bushes compress and expand outward against the inside wall of the staff tubing. This friction is what helps hold the hub securely in place while still allowing it to be removed when needed.

For a closer look at assembly, adjustment, and maintenance, read our Guide to Fusion Pressure-Fit Connectors.

3 or 4 Spoke Configurations

Fusion Ultra Hubs can be configured with either 3 or 4 dragon staff spokes per hub. This gives you the flexibility to adjust the weight, visual profile, and overall feel of your dragon staff without changing hubs.

If you’re deciding how many spokes to use, our 3, 4, or 5 Spoke Dragon Staff Guide breaks down the practical differences between common configurations.

Easy Spoke Installation

Spokes are secured to the hub using 3 mm hex hardware, making installation and removal straightforward with a 3 mm Allen Key. This makes it easy to remove your spokes for transportation or swap between compatible fire, LED, and daytime setups.

For installation instructions, check out our How to Install Spokes into Dragon Staff Hubs guide.

Ultra vs. V3 Dragon Staff Hubs

The Fusion Ultra Hub is designed around the removable Fusion pressure-fit connector and fits compatible 3/4 inch ID (19 mm ID) staff tubing. If you’re looking for a hub designed to clamp around a contact staff rather than insert into the end of the tubing, check out the Threeworlds Fusion V3 Dragon Hub.

Not sure which system is right for your setup? Our V3 vs. Ultra Dragon Staff Hubs guide covers the differences between the two designs.

Built for Collapsible Dragon Staffs

The removable hub and spoke system makes the Fusion Ultra particularly useful for travel and compact storage. Instead of transporting a fully assembled dragon staff everywhere you go, the hubs and spokes can be removed and packed separately from the staff body.

Just remember that pressure-fit connectors depend on friction. Keep the rubber bushes and the inside of your staff tubing clean, dry, and free of dust or oily residue so the connector can tighten properly.

The Threeworlds Fusion Ultra Dragon Staff Hubs are pressure-fit dragon staff hubs designed for the Fusion system, combining a secure connection with the ability to quickly install or remove your hubs for travel, storage, and different staff configurations. Each hub accepts either 3 or 4 spokes, allowing you to customize the feel and configuration of your dragon staff.

Unlike permanently mounted hubs, the Fusion Ultra uses an expandable pressure-fit connector that inserts directly into compatible 3/4 inch ID (19 mm ID) staff tubing. Tightening the connector compresses the internal rubber bushes, causing them to expand against the inside of the tubing and securely hold the hub in place.

Pressure-Fit Fusion Connection

Each Ultra Hub uses a short Fusion Cam Bolt with 2 Fusion Nylon Washers and 2 Fusion Rubber Bushes alternating beneath the cam bolt. A D90 O-Ring sits at the base of the connector.

As the connector is tightened, the rubber bushes compress and expand outward against the inside wall of the staff tubing. This friction is what helps hold the hub securely in place while still allowing it to be removed when needed.

For a closer look at assembly, adjustment, and maintenance, read our Guide to Fusion Pressure-Fit Connectors.

3 or 4 Spoke Configurations

Fusion Ultra Hubs can be configured with either 3 or 4 dragon staff spokes per hub. This gives you the flexibility to adjust the weight, visual profile, and overall feel of your dragon staff without changing hubs.

If you’re deciding how many spokes to use, our 3, 4, or 5 Spoke Dragon Staff Guide breaks down the practical differences between common configurations.

Easy Spoke Installation

Spokes are secured to the hub using 3 mm hex hardware, making installation and removal straightforward with a 3 mm Allen Key. This makes it easy to remove your spokes for transportation or swap between compatible fire, LED, and daytime setups.

For installation instructions, check out our How to Install Spokes into Dragon Staff Hubs guide.

Ultra vs. V3 Dragon Staff Hubs

The Fusion Ultra Hub is designed around the removable Fusion pressure-fit connector and fits compatible 3/4 inch ID (19 mm ID) staff tubing. If you’re looking for a hub designed to clamp around a contact staff rather than insert into the end of the tubing, check out the Threeworlds Fusion V3 Dragon Hub.

Not sure which system is right for your setup? Our V3 vs. Ultra Dragon Staff Hubs guide covers the differences between the two designs.

Built for Collapsible Dragon Staffs

The removable hub and spoke system makes the Fusion Ultra particularly useful for travel and compact storage. Instead of transporting a fully assembled dragon staff everywhere you go, the hubs and spokes can be removed and packed separately from the staff body.

Just remember that pressure-fit connectors depend on friction. Keep the rubber bushes and the inside of your staff tubing clean, dry, and free of dust or oily residue so the connector can tighten properly.

SKU 3WUDH Category Brand:

Flow toys are props and tools used in flow arts, which is a movement based art-form that involves object manipulation. Flow props are extensions of your body and tools for self expression.

Despite being called “toys”, flow toys are meant for everyone and you will find that a majority of flow artists are actually adults! Contemporary flow arts include many modalities like dance, martial arts, or just “free-flow.”

The best flow toy to start with is the one that you’re most excited to learn. Although some props might be more difficult to learn than others, this differs greatly from one person to another. We found that the more excited you are to learn a specific prop, the more likely you will be to practice and learn quickly.

Stick props like dragon staff, contact staff, or spin staff can be easier for some since its a more static prop that you can hold onto. Rope props like poi and rope dart require more plane control at the beginning but are also much easier to travel with. Others like flow stars and pixel whips have their own kind of movements that don’t really fall into the other two categories we mentioned. But they’re super popular for ravers and festival goers!

We have a feeling you’ll end up owning more than one type of prop though so regardless of what your friend thinks is the best flow toy to start with, just get whatever you’re most excited to learn!

Fire dancing carries some inherent risks, but if you follow all of our fire safety instructions the risks are very avoidable. We recommend feeling super comfortable with a flow toy before lighting it on fire for the first time.

If you’re new to flow arts, we also recommend getting a daytime practice prop (or even LED prop) since you might be dropping your flow toy a lot when you’re first learning. The Kevlar on fire props can deteriorate much more quickly from repetitive drops, so practice props are ideal to keep them safe.

We have fire, LED, and daytime versions of most of our main props. Even if you can only afford one version and end up starting with a fire prop, they can be protected with wick covers. No matter what type you have, we recommend practicing on soft ground like grass to protect them as much as possible.

After you read the fire safety guide linked above and before lighting up you fire tool, please also read through our safety disclaimer.

We ship our products Monday-Friday from Los Angeles, CA, USA. Many of our listed products are ready-to-ship unless we have to assemble them, which can add a day or two to process. That being said, we ship out orders in the order they are placed within 1-2 business days (with some exceptions like holiday seasons). 

Once shipped, we use USPS for orders in the USA and usually UPS for all international orders. Ground shipping in the US usually takes about 3-5 business days from shipping date, while priority shipping can be between 1-3 business days from shipping date. These are estimations and not guarantees as USPS might have delays, but reach out to us if you are looking for more specific time frames!

We can’t promise any specific shipping timeframes for international delivery as customs can cause many unforeseen delays.

Of course! We’re just a text, email, or DM away from being able to answer any question you have. All of our contact details can be found here or you can scroll down to find the buttons in our footer. We’re active on social media too so we are pretty easy to get a hold of!

Related products

This category includes Threeworlds Fusion components and modular staff hardware for collapsible contact staffs, dragon staffs, and spin staffs. You’ll also find Flowbonacci plug hubs, dragon staff heads, and other compatible staff components as we continue expanding our offerings.

We stock staff ends, collapsible handles, dragon staff hubs and kits (V3, Ultra, Plug Hubs), spokes, cam bolts, nylon washers, rubber bushings, connector hardware, and assembly tools. These parts are designed for building, maintaining, or upgrading modular staff systems with pressure-fit and collapsible designs.

Our goal is to make it easier to source Threeworlds Fusion components, Flowbonacci parts, and other modular staff hardware within the USA so you are not waiting on international shipping for small but essential pieces.

We are actively growing this category to support more collapsible staff models and dragon staff systems. If you do not see the specific component you need, reach out and we will help you track it down.