...
Bonobo Flow Name Logo
0
Bonobo Flow Name Logo
0
Fusion Connector O-Ring D90 for use in fusion handles and middle pieces
closeup of a fusion pressure fit connector
removable end cap used to protect the end of a dragon staff before installing hubs
Fusion Connector O-Ring D90 for use in fusion handles and middle pieces
closeup of a fusion pressure fit connector
removable end cap used to protect the end of a dragon staff before installing hubs

Fusion Rubber O-Ring for Connectors (D90)

$1.25

  • For Fusion Pressure-Fit Connectors

Only 4 left in stock

Fast
Shipping

Speedy
Support

Secure
Checkout

Durable
Products

The Fusion Rubber O-Ring is a replacement O-ring used throughout the Threeworlds Fusion pressure-fit connection system. Each individual Fusion connector uses one O-ring to help provide the friction and tension needed for a secure pressure-fit connection.

These O-rings are made from D90 nitrile rubber and measure 9/16 inch (14mm) internal diameter with a 0.10 inch (2.5mm) thickness and approximately 5/8 inch (16mm) outside diameter.

Fusion Compatibility

This replacement O-ring is used in individual pressure-fit connectors found across several Fusion components, including:

Each individual connector uses one O-ring, so components with pressure-fit connectors on both ends require one for each connector.

Maintaining Your Fusion Connectors

If your Fusion connection is no longer tightening or releasing as smoothly as it used to, inspect the O-ring along with the rubber bushes, nylon washers, and cam bolt for wear or damage.

For installation, adjustment, and maintenance instructions, see our guide to using Fusion pressure-fit connectors.

The Fusion Rubber O-Ring is a replacement O-ring used throughout the Threeworlds Fusion pressure-fit connection system. Each individual Fusion connector uses one O-ring to help provide the friction and tension needed for a secure pressure-fit connection.

These O-rings are made from D90 nitrile rubber and measure 9/16 inch (14mm) internal diameter with a 0.10 inch (2.5mm) thickness and approximately 5/8 inch (16mm) outside diameter.

Fusion Compatibility

This replacement O-ring is used in individual pressure-fit connectors found across several Fusion components, including:

Each individual connector uses one O-ring, so components with pressure-fit connectors on both ends require one for each connector.

Maintaining Your Fusion Connectors

If your Fusion connection is no longer tightening or releasing as smoothly as it used to, inspect the O-ring along with the rubber bushes, nylon washers, and cam bolt for wear or damage.

For installation, adjustment, and maintenance instructions, see our guide to using Fusion pressure-fit connectors.

SKU 3WFOR Category Brand:

Flow toys are props and tools used in flow arts, which is a movement based art-form that involves object manipulation. Flow props are extensions of your body and tools for self expression.

Despite being called “toys”, flow toys are meant for everyone and you will find that a majority of flow artists are actually adults! Contemporary flow arts include many modalities like dance, martial arts, or just “free-flow.”

The best flow toy to start with is the one that you’re most excited to learn. Although some props might be more difficult to learn than others, this differs greatly from one person to another. We found that the more excited you are to learn a specific prop, the more likely you will be to practice and learn quickly.

Stick props like dragon staff, contact staff, or spin staff can be easier for some since its a more static prop that you can hold onto. Rope props like poi and rope dart require more plane control at the beginning but are also much easier to travel with. Others like flow stars and pixel whips have their own kind of movements that don’t really fall into the other two categories we mentioned. But they’re super popular for ravers and festival goers!

We have a feeling you’ll end up owning more than one type of prop though so regardless of what your friend thinks is the best flow toy to start with, just get whatever you’re most excited to learn!

Fire dancing carries some inherent risks, but if you follow all of our fire safety instructions the risks are very avoidable. We recommend feeling super comfortable with a flow toy before lighting it on fire for the first time.

If you’re new to flow arts, we also recommend getting a daytime practice prop (or even LED prop) since you might be dropping your flow toy a lot when you’re first learning. The Kevlar on fire props can deteriorate much more quickly from repetitive drops, so practice props are ideal to keep them safe.

We have fire, LED, and daytime versions of most of our main props. Even if you can only afford one version and end up starting with a fire prop, they can be protected with wick covers. No matter what type you have, we recommend practicing on soft ground like grass to protect them as much as possible.

After you read the fire safety guide linked above and before lighting up you fire tool, please also read through our safety disclaimer.

We ship our products Monday-Friday from Los Angeles, CA, USA. Many of our listed products are ready-to-ship unless we have to assemble them, which can add a day or two to process. That being said, we ship out orders in the order they are placed within 1-2 business days (with some exceptions like holiday seasons). 

Once shipped, we use USPS for orders in the USA and usually UPS for all international orders. Ground shipping in the US usually takes about 3-5 business days from shipping date, while priority shipping can be between 1-3 business days from shipping date. These are estimations and not guarantees as USPS might have delays, but reach out to us if you are looking for more specific time frames!

We can’t promise any specific shipping timeframes for international delivery as customs can cause many unforeseen delays.

Of course! We’re just a text, email, or DM away from being able to answer any question you have. All of our contact details can be found here or you can scroll down to find the buttons in our footer. We’re active on social media too so we are pretty easy to get a hold of!

Related products

This category includes Threeworlds Fusion components and modular staff hardware for collapsible contact staffs, dragon staffs, and spin staffs. You’ll also find Flowbonacci plug hubs, dragon staff heads, and other compatible staff components as we continue expanding our offerings.

We stock staff ends, collapsible handles, dragon staff hubs and kits (V3, Ultra, Plug Hubs), spokes, cam bolts, nylon washers, rubber bushings, connector hardware, and assembly tools. These parts are designed for building, maintaining, or upgrading modular staff systems with pressure-fit and collapsible designs.

Our goal is to make it easier to source Threeworlds Fusion components, Flowbonacci parts, and other modular staff hardware within the USA so you are not waiting on international shipping for small but essential pieces.

We are actively growing this category to support more collapsible staff models and dragon staff systems. If you do not see the specific component you need, reach out and we will help you track it down.