PX3 Poi Knob

PX3 POI KNOBS are made from a super tough, colorful thermoplastic rubber. They’re designed for a secure grip and built to last. These round knobs feature a 6mm hole perfect for thick ropes and come in UV reactive colors that glow brightly under blacklight.

Even though the hole is 6mm, 10mm rope can be pulled through because it’s a stretchy rubber. For this reason, we also recommend using washers inside of the knobs after pulling the rope through. These can also be used for Leviwands as long as the tether is modified to not fall through the hole.

How to Use

• Pull rope through hole of the poi knob from the bottom side towards the open side.
• For 1/4″ (6mm) ropes: Tie an overhand knot in the rope
  • We recommend using 1/4″ (6mm) washers between the knot and knob to ensure that ropes don’t slip through the hole.
• For 3/8″ (10mm) ropes
  • Synthetic ropes: Melt the end of the rope with a lighter and flatten it to make the end much wider than the hole
  • Technora / non meltable ropes: Flatten the end of the rope to become wide and use epoxy to create a wide end.
  • We recommend using 3/8″ (10mm) washers between the knot and knob to ensure that ropes don’t slip through the hole.